E62 series of surface-mounted thermostats are designed for use in underfloor heating systems. These thermostats control the indoor temperature by taking into account the preset temperature values. If the room temperature drops below the set temperature, the thermostat switches on the heating device to warm up the room. Once the desired temperature is reached, the thermostat turns off the heating device to prevent overheating and conserve energy.

The thermostat offers multiple options for controlling the indoor temperature, including through the built-in sensor, floor sensor, or a combination of both. The desired temperature can be easily set by rotating the knob on the panel, with a range of 10℃ to 35℃. When the heating is on, an annular red indicator lights up. The product design is simple and elegant, making it suitable for any style of decor.

Technical data

Voltage: 230V

Consumption: <2W

Temperature Range: 12~35℃

Temperature switch differential: Default 1℃

Ambient temperature: 0~50℃

Protection class: IP20

Connecting Cable: RVV0.5

Housing material: PC+ABS

Selection table

Notice

1. The installation must be done after power off.

2. Please connect wires strictly according to the wiring diagram.

3. It is recommended that the installation height should be 1.4m or be in the same level of other wall switches.

4. If the thermostat displays Er0, the built-in sensor is in breakdown; if the thermostat displays Er1, external sensor is in breakdown.

5. Do not install the thermostat in a non-ventilated position, such as in the corner, behind the door etc.

6. Do not install the thermostat in a place with strong airflow or near the cold or heat source.

7. Do not let the water, cement paste, metal particles and other debris into the thermostat. These will damage the thermostat.